Ideal Industries 61-766 True RMS Volt/Amp Clamp Meter with TightSight Display

True RMS
Capacitance
Frequency measurement via clamp head or leads
40AAC low range
Perfect for motor and ASD troubleshooting
Measures up to 600AAC
TightSight bottom display
Voltage-presence warning on all functions
Tapered jaws with hook tip
Max/Min
Peak Max/Min (1ms)
Audible continuity
Selectable auto power off
Data Hold
Includes leads, alligator clip and case

Displays: 3-3/4 digit LCD with 4000 counts for both displays
Backlight: Green illumination with auto-off after 4.5 minutes
Analog Bargraph: 41 segment LCD with measurements of 20 times per second
Polarity: Automatic, positive implied, negative (-) polarity indication
Overrange: "OL" indication is displayed
Zero: Automatic
Measure Rate: Samples 2 times per second, nominal
Auto Power Off: Approx. 30 minutes of non-use
Low Battery Indication: The " " is displayed when battery voltage drops below operating level
Power Supply: 1x 9V battery (Not Included) in an isolated battery compartment
Accuracy: Stated accuracy at 23°C ±5°C, <75% R.H.
Temperature: 0.1 x (specified accuracy) per °C
Coefficient: (0°C to 18°C, 28°C to 50°C)
Altitude: 6561.7 ft. (2000m)
Operating Environment: 32°F to 122°F (0°C to 50°C) at < 70% R.H.
Storage Environment: -4°F to 140°F (-20°C to 60°C) at < 80% R.H. with battery removed from meter
Jaw Opening: Accepts 1.42" (36mm) conductor
Accessories included: Carrying Case, Test Leads with alligator clip, operating instructions
AC Converter: True RMS
Accuracy: Accuracy is specified as +/-(a percentage of the reading + a fixed amount) at 23°C±5°C (73.4°F ± 9°F), less than 75% relative humidity.
Temperature Coefficient: 0.1 times the applicable accuracy specification per degree C from 0°C to 18°C and 28°C to 50°C (32°F to 64°F and 82°F to 122°F)

This clamp has been tested to the best of our capabilities and everything works as it should