Featured Products
Tools
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
7.2V DC Li-On, 16Wh, 2100mAh. 2" - 3 1/4" (50mm - 82mm) nails. In excellent condition. Comes with everything shown in pics.
Mitutoyo Series 103 micrometers are some of the best quality micrometers available on the market today.
Carbide Tips - Made In Japan - Range: 0-6" - Graduations: .001" - Hammertone, baked enamel-finished-frame - Ratchet Stop for exact repetitive readings
This preowned six micrometer set is good clean used condition. Included are the six micrometers and fitted wooden case. No standards or wrenches included. The faces are clean with no marks or scratches. The thimbles spin freely, the ratchets are good and crisp and the thumb locks are solid. Cosmetically, aside from initials scratched into the frame of each mic, they are all in good clean condition with no notable
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition.
Features
• 30% stronger magnet than current magnetic tray model, will hold 20 lb of tools
• 16 x 8" model has dual handles that slide out for carrying and retract in for easy storage
• Protective rubber feet allow the tray to be placed on delicate surfaces while working on projects
• Powder-coated base with galvanized steel top
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. Tested and working.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
110-120V AC 10amp. Uses 3G staples. Made in Italy.
DEWALT DW715
12-INCH (305mm) SINGLE-BEVEL COMPOUND MITER SAW
THE ITEM IS IN USED CONDITION AND SHOWS SIGNS OF USE, BUT STILL WORKS GREAT OVERALL
THE DUST BAG IS MISSING
Time tested performance!
9-3/4-inch adjustable bench plane with a 2-inch cutter
Cast-iron base with precision-ground sides and bottom
Hardened, tempered steel gives precision-ground cutter edge durability
Cutter adjusts for depth and alignment, offering precise control
Quick-release cam-lock makes iron removal easy
This preowned Stanley planer is in good used condition with a missing front knob and staining/light rusting to polished components. The cutter has a sharp edge and is free of chips and knicks.
Item is well used and shows signs of wear and use including scratches, scuffs and wear marks. Nothing appears to be damaged. Tested and working with another Snap-On battery.
Item is used but in good overall condition. Shows light signs of use including some scuffs and marks. Nothing appears to be damaged. Fully functional. Includes 2x Snap-On CTB8174 7.2V-14.4V 2.5AH 36WH batteries. Batteries work and charge.
Tool is used and shows signs of wear and use including scratches and marks. Only apparent sign of damage is fraying cord near the base of tool. Tested and working. Does not include case or any accessories.
Tool is used but in very good overall condition. Shows some light signs of use. Nothing appears damaged. Fully tested and working. Includes original Ramset UD4824120100G 12v DC 1000mA adapter and B0020 dual charger. 2x Ramset T3 B0092 6V batteries. Also included is a box of 3/4" Ramset brand T3034B fasteners. 2 fuel cell canisters are also included. They are used but still have a good amount of gas left. No case is included.
- Same tools. New name. Hitachi power tools has renamed to Metabo hpt
- Pneumatic power feed and return allows tool to operate in the harshest conditions
- Side loading magazine convenient and easy for quick replenishment
- Tool-less depth of drive adjustment for precision nailing/flush driving
- Carbide tipped push lever reduces wear
This item is in good physical condition and in good working order.
Prouduces 230 ft-lb of torque at a lightweight 4.25 lb
Long run time, high-capacity 90 watt-hour 18 V MonsterLithium battery
Tough cold-formed alloy steel anvil
MonsterLithium battery uses digital fuel gauge and micro-controller to monitor temperature and amperage - prevents motor overheating
Inside or outside of the shop a portable powerhouse that can withstand the toughest conditions
This preowned Snap On 3/8 18v impact wrench is in lightly used condition with no notable signs of use. The set includes the CT8810BG wrench, CTC131 charger, (1) CT8185BK batter
Armored N.C. Overhead Door Contact 3" Wide Gap Indoor AS NEW
Useful for industrial situations where a wide-gap, surface mount contact is needed
Rugged aluminum housing
Weatherproof and sealed for outdoor use
Iridium-plated to have a high melting point and Vickers hardness, for higher power handling and long life
Mounting bracket included
3" (76mm) Gap
36" (91cm) wire leads enclosed in armored cable
This preowned Seco-Larm SM-4601-LQ is in "As New" condition - never used - never installed. Packaging shows wear from handling/storage.
DOOR INSTALL KIT FROM KWIKSET
IN CASE
PLEASE SEE PHOTOS FOR CONDITION
Item is used but in excellent condition. Fully tested and working. Includes all probes and leads. No visible signs of damage.
Rosewill RHSP-19003 Power Strip Tower Surge Protector Charging Station, 4 Smart USB Ports, 10 AC Outlets, 6.6 Feet Long Extension Cord, 1875 Watts Max Power, 1000 Joules. New Open Box
The large, comfortable Grip Shield makes handling easier. The stamped aluminum drum can’t rust or crack.
The item in this listing has not been tested, but is in very nice physical condition and comes with its carrying case. There are NO attachments accompanying the tool.
- Includes 4 Power Tools; variable speed hammer drill, circular saw, jigsaw and flashlight. Each tool integrates with the workbench to become a drill press, table saw, scroll saw and table light
- Each tool built for power and durability with steal gears.
- POWERhandle System - patented power center for the POWER8 designed to charge quickly and power every tool in the system
- Quick Recharge - Fully charges your tools in one hour
- Ships with POWERhandle, work bench, table saw shield, work clamp, protractor, carrying bag, 2 accessory cases and instruction manuals
Item is USED. Shows some light scuff marks on back (see photo). Includes everything shown in photo. Tested and working.
DEWALT 20V MAX
BRUSHLESS
1/2" (13MM) DRILL DRIVER
HAS CLIP
*BARE TOOL ONLY*
Case is in excellent used condition. Shows some very light scuffs and minimal scratches. Very clean inside. Both hinges are functional.
This item is in "Like New" excellent condition. The item shows no signs of wear and use. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Includes drill, 2x 1.5ah Batteries and charger.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Includes a Hilti 18v 3.3 Ah 71.3Wh Li-Ion battery ***NO charger is included
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
STREAMLIGHT STYLUS
LED FLASHLIGHT
"THINNEST ALKALINE PENLIGHT IN THE WORLD"
100,00 HR "SOLID- STATE" LED
CAMO COLOURED
Lot of 4 older model combination wrenches made by Gray Canada
Set includes:
163B - 9/16
162B - 1/2
161B - 7/16
160B - 3/8
These are older model wrenches made by Blue Point.
Set includes:
S-1214 (3/8 - 7/16)
S-810 (1/4 - 5/16)
OXI-12 (3/8)
OXI-11 (11/32)
OXI-9 (9/32)
These are older model wrenches made by Blue Point.
Set includes:
XS-2024(5/8 - 3/4)
XS-1820(9/16 - 5/8)
XS-1618(1/2 - 9/16)
WXS-6A9(1/8 - 3/16) *British Whitworth
XS-1012 (5/16 - 3/8)
Mitutoyo V-Blocks and clamps hold square or round workpieces for layout and inspection work. These tools are made of hardened steel.
Included are two V-blocks, clamps and wooden storage box
Contact faces are ground and lapped.
Capacity 1 Inch, 1 1/4 x 1 1/4 x 1 5/8 Inches
This preowned V Block set is in good used condition. The blocks have light scratching from use/handling. They are free from dings or deep scratches. The clamps have wear/chips/scratches to their panted surface. Their screws turn smoothly. The wooden storage box has wear from storage /handling.
Delivers up to 2X more runtime, 20% more power and 2X more recharges than standard Li-Ion batteries. The Milwaukee 48-11-1820 M18 REDLITHIUM 2.0 Compact Battery Pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life than any battery on the market. It offers 2.0 amp-hours of runtime. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0F/-18C. Its compact, lightweight design fits in tight work spaces and reduces user fatigue. Managed by Milwaukee's exclusive Redlink Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Switch to the REDLITHIUM 2.0 Compact Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools.
- Best-in-class construction: offers long-lasting performance and durability
- Integrated weld frame
- Cell separator
- REDLINK Intelligence overload protection prevents you from damaging your cordless power tool investment in abusive situations
- Versatility: powers more than 40 Milwaukee M18 cordless power tools
- For use with M18 cordless tools
The battery in this listing is in good pre-owned condition.
This item is used but in excellent condition. It shows very little signs of wear and use. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
- XR lithium-ion batteries with fuel gauge provide 33% more capacity over standard packs
- Compact (7.5-inch front to back), lightweight (3.6 lbs.) design fits into tight areas
- High speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds
- Ergonomic comfort grip handle provides ideal balance and tool control
- Metal 1/2-inch ratcheting chuck for superior bit gripping strength
- 3-mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
- LED spotlight mode features 20-minute shutoff function allowing for extended work time in dark or confined spaces
his item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Kit includes Bosch GRL240 HV rotary laser level, LR24 laser receiver, GR8c 8 foot aluminum leveling rod & BT152 aluminum contractor grade tripod. All items power on and appear to be fully functional.
The Starrett No.436 Outside Micrometer features:
Starrett satin chrome finish – no glare – resists rust
Starrett Wooden Box/Case
Sleeve design with staggered lines and distinct figures for precise and easy readability
Rugged - easy to use construction
Balanced frame and thimble design ensure easy handling
Knurled locknut
Quick and easy adjustment
Micro-lapped measuring faces
+/-.0001" accuracy (in)
This preowned Starrett 436 2-3 in micrometer includes the micrometer, wooden box/case and spanner. The micrometer is in good used condition and works smoothly. The micrometer frame has engraving from the previous owner and some scuffing/scratching/marking. The box/case has wear/marking from use/storage.&
9 PIECE SWIVEL SOCKET SET
MIX SK, MASTERCRAFT AND NO NAME SOCKETS
SK 40612 3/8"
SK 40614 7/16"
SK 40620 5/8"
SK 40622 11/16"
SK 40624 3/4"
NO NAME 7/16"
MASTERCRAFT 9/16"
NO NAME 1/2"
NO NAME 3/4"
ALL ON A RAIL
PROTO 1242 1-5/16-INCH 12-POINT COMBINATION WRENCH
THERE IS SOME WEAR - PLEASE SEE PHOTOS
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
PAM's professional autofeed screw system increases productivity and improves quality. The P13KUE autofeed tool is designed for decking & subfloor applications and handles fasteners 1" to 3" in length.
Kit includes Milwaukee 2500 RPM Motor, Auto-Feed Attachment, 20" Extension & Carrying Case.
- Fast, precise and repeatable depth control
- Most consistent countersink in the industry
- Use with or without extension
- Fast change option allows for quick change over to different screw size
- Used for decking, drywall, roof tile, siding & subfloor applications
- Fastener Size: #6 to #12 screws 1" to 3" in length
- Length: 42" or 21" (without extension)
- Motor: Milwaukee 2500 RPM 6.5 Amp
An all round tool that delivers around 57% more run time than brushed motors due to its brushless motor, the compact 300w motor provides 0-22,000 oscillations per minute, providing quicker completion of the most challenging tasks.
Featuring the latest DeWalt quick-change accessory system, the user can swap blades and attachments fast and safely without using any other tools.
The dual grip variable speed trigger ensures safe application control and ultimate speed, as well as a dual position rocker switch and a front mounted LED work light.
Great for cutting in drywall or skirting, cutting fabrics, clean grout removal, pipes or timber, flooring, sanding, scraping or preparing surfaces, this Oscillating Multi-Tool ensures comfortable use over extended periods thanks to its rubber over mould and ergonomically designed handle.
This sander is in excellent condition. Tested and working.
Item is in mint "like new" condition. Shows very little to no signs of wear and use.
The DEWALT 1/2 in. x 10 in. 2 Cutter Spline Shank Rotary Hammer Bit features an open head design and U-Flute for efficient drilling. This hammer bit can be used with spline rotary hammers to help with drilling anchor and through holes in masonry. Rock carbide tipped for long life and durability.
- For use with spline rotary hammers
- For drilling anchor and through holes in poured concrete and other masonry up to 2 in. Dia
- Rock carbide tip helps maximize carbide surface contact for longer bit life
- U-Flute cleans debris out for fast, efficient drilling
- Open head design channels dust into flutes for quicker drilling
This item is used but in excellent condition. The item shows minor signs of wear and use. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used but in excellent condition. The item shows little to no signs of wear and use. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Mr. Heater Contractor Series Forced Air Propane Heaters range from 38K to 400K BTU's and are built to last with high-quality components. All heaters come equipped with Quiet Burner Technology™. QBT heaters are quieter than standard propane heaters by as much as 50%. Typical uses include: construction sites, patios, factories, sporting events, utility and out buildings and farming functions (barns, etc.).
- Heats approximately 4,000 sq. ft.
- Runs up to 17 hrs. on 100lb. tank (low setting)
- High-temperature limit switch
- Automatic solid state ignition
- Thermostat
- 10-in hose and regulator included
- CSA certified
- QBT technology
This item is in LIKE NEW condition.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
The Milwaukee 8m/26 ft. Wide Blade Tape Measures have the longest reach and straightest standout in the industry. Users can reach further on the jobsite with up to 17 ft. of reach to take long measurements on their own. The Milwaukee blade design provides the straightest standout, reducing blade arc for efficient and accurate measuring. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional anti-tear coating on the first 6 -inch of the blade, reducing tape tear. Built to withstand the jobsite, the measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
- Up to 17 ft. of reach
- Lanyard-ready for quick and easy tethering
- Longest, Straightest Standout
- Anti-Tear Coating Reinforces the first 6-inch of the Tape Blade
- Nylon Bond Blade Protection Reduces Tape Tear
- Impact-Resistant 5-Point Reinforced Frame
- Finger stop delivers tape retraction control
- 2-Sided Printing For Easy Reading
- Architectural Scale
- Wire form belt clip
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes.
Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This is for the drill and impact driver and 2x 20v lithium batteries. NO CHARGER is included.
This item is used but in excellent condition. The item shows little to no signs of wear and use. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Does NOT include 12v car charger or usb cable. Jumper pack and jumper cables ONLY.
Item is in very good overall used condition. Shows very little signs of wear and use. Chrome finish is in great shape. Dial is smooth and torque function seems fully operational.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition.
DEWALT DCB203 20V / 2AH BATTERY
TESTED, WORKS AND HOLDS A CHARGE
IT HAS "AK 285" WRITTEN ON IT
BATTERY ONLY - NO CHARGER OR TOOL
tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Tool is in very good overall used condtion. Fully tested and working. Some signs of wear and use. Nothing appears to be damaged.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
**Please note the 2 smaller wrenches (1/4 5/16 & 7/16 3/8) have broken plastic**
Kit includes 3x 20v 1.5aH lithium batteries, 2 chargers and Impact Drill head.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
The MATRIX Quick Connect System lets you drill, cut, sand, and more with a base tool and a variety of interchangeable attachments. Featuring best-in-class speed and torque, the system enables you to build your workshop as you go — and tackle virtually any household task — while saving money and space.
Features
- Matrix Quick Connect System allows quick and easy change of a variety of attachments
- Powerful 20V Max motor provides enough power for a full range of applications and attachments
- Impact attachment for driving screws and other large fasteners with ease
- Produces up to 1,300 in-lbs. of torque for tough fastening applications when used as an impact driver
- Lithium-Ion battery holds a charge for up to 18 months
- Compact and lightweight design allows users to carry out drilling and driving tasks in confined spaces with ease
Tool is in very good overall used condition. Very smooth movement. Everything appears to be clean and fully functional.
Product Overview
Features
- Provides smooth, uniform flares with minimum effort
- Hardened steel flaring cone produces rolling action for even metal flow
- Creates uniform flare walls without galling
- Cone is eccentrically mounted in needle bearings
- Equipped with special ironing features to ensure a smooth flare
- Recommended for aluminum and soft copper
- Suitable for steel, stainless steel, hard copper, and brass
- 37° SAE flare sizes: 1/2", 5/8", 3/4", 7/8", 1"
Description
The RIDGID 375 (41285) Heavy Duty Flare Tool for 37° is designed to form 37° SAE flares with minimum effort. It is equipped with a hardened steel flaring cone, which is eccentrically mounted in the needle bearings. The cone produces a rolling action for an even metal flow, resulting in uniform flare walls without galling. A special ironing feature ensures that the completed flare is smooth.
The 375 Heavy Duty Flare Tool is recommended for use with aluminum and soft copper. It will also flare steel, stainless steel, hard copper, and brass.
Tool is USED and shows lots of signs of wear and use. Lots of marks/scuffs. Noting appears to be damaged. Powers on and motor sounds to be smooth. Impact funtion was tested and is working.
Includes battery. No charger is included in this listing. Fully tested and working. Battery charges and holds a charge.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional.
Walter Tools A6985TFP-11.5 Alpha 4 11.5 mm Solid Carbide Coolant Through Drill, 364 mm. Item is in excellent near mint condition. Does not appear to have ever been used. Comes in protective case.
Walter AG - A7595TTP-7 - Extra Long Drill Bit, Drill Bit Size 7.00mm. Item is in excellent condition however the tip appears to have chips (see photo) Otherwise in mint condition. Comes in protective case.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has been tested and is fully functional. Includes Dewalt DCB207 1.3Ah battery.
Tool is in very good condition and is tested and fully functional. No major damage or signs of wear other than cord near the body. (see photo)
Blazing fast speed in a compact well balanced package provides the ultimate in performance for the most demanding professional drywall installer. Includes Senco's patent pending corner-fit indexing technology that allows placement of screws into tight places unreachable by any other auto-feed screwgun on the market. With reduced force to fire you can drive screws all day with less fatigue.
- High speed motor designed for drywall applications
- Patented feed system fits into corners
- Load quickly with our EZ Load feature
Item is brand new in factory sealed plastic. Never used.
Tools have been tested and working. 3 Piece - Finish Nailer Kit
Includes
- 2 1/2" Finish Nailer
- 1 1/4" Brad Nailer
- 1/4" Crown Stapler
These items are used. They shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. They have been tested and fully functional.
JOHNSON LASER LEVEL KIT
MODEL NO. 40-0909 (CANADA) / 9100 (U.S.A.)
COMES IN A CARRYING CASE WITH RED GOGGLES, TRIPOD, MOUNTING BRACKET AND 2 LASER DOT ACCESSORIES
THE LASER LEVEL REQUIRES 2 x 'AAA' BATTERIES (NOT INCLUDED)
ALL THE LEVEL BUBBLES ARE IN GOOD SHAPE
Tool is used but in good overall condition. Tested and working. Some signs of wear and use. Nothing appears to be damaged.
Nailgun is in good overall condition. Shows some slight signs of wear and use. Nothing appears to be damaged. Tested and working.
The item in this listing is in LIKE NEW condition, showing no signs of previous use.
The original applicator with wheels. Also known as a Direct Flusher, use in co-ordination with various compound tubes or corner box applicators to simultaneously wipe off extra compound and feather/ smooth the edges, leaving a perfect inside corner. All stainless steel blades, wheels and skid plates.
The item in this listing is in excellent condition with no signs of previous use.
OEM brand part number 44914 2 Jaw 5 Ton Puller. Tool is in excellent condition hower the packaging is slightly damaged.
REMINGTON 476 POWDER ACTUATED TOOL
USED .22 CAL LOW VELOCITY POWER LOADS (NOT INCLUDED) TO FASTEN UP TO 2.5-inch POWER FASTENERS
THE STRIKE OF A HAMMER WILL ACTUATE AND FIRE A PIN INTO CONCRETE, STEEL OR MASONRY
Tool is used but in good overall condition. Tested and working. No damage.
Features
- 1-1/4 HP, 6.5-amp, 120-Volt/60 Hz motor
- Variable speed of 10,000 - 32,000 RPM (no-load)
- Electronic speed control monitors and maintains speed under load for consistent performance
- Built-in LED work lights help illuminate the work area
- Collet capacity of 1/4" and 3/8"
- 1-3/8" base opening
- 7/8" plunge depth
- 12ft power cord
- Kit includes: straight edge guide, dust hood attachment, and carrying bag
If dry gauges are work horses, then liquid-filled pressure gauges are like the Budweiser Clydesdales, doing the same job but with greater precision. Liquid-filled pressure gauges are available in pressure ranges equal to or higher than their dry counterparts. Their casings are filled with fluid, usually glycerine, although silicone or other liquids are sometimes used. The liquid coats the internal parts and is visible on the gauge's face. Having the liquid inside works to dampen the effect of pulsation and pressure spikes - which is another advantage over choosing a dry gauge. This means the pressure gauges are less likely to give inaccurate readings due to wear and tear that mechanical vibration and pulsation tends to cause. The liquid in these pressure gauges does double duty when it comes to fighting those effects. Not only does it help mitigate the effect of vibration, the liquid also lubricates the gauge's moving parts, reducing everyday friction. The filling also has the benefit of preventing internal corrosion. As the bourdon tube and movement are covered by a liquid that keeps moisture and other corrosive substances at bay. All of those factors add up to longer service life and lower replacement costs for liquid-filled pressure gauges over dry pressure gauges. And in environments where vibration and condensation are a factor, they are definitely a consideration.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines – all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia. concentricity.
Horizontal Dial Test Indicators with fitted case.
5/32" Adapter Shank Dia.
Swiss Made
Dial Diameter 1"
Graduation .01mm
Product Highlights
- Independent-opening double-lever design
- Slim body design
- No metal (iron core) exposure
- AC Current range: 42.00 to 1000 A AC, 3 ranges (±1.5 % rdg. ±5 dgt. at 50 or 60Hz) - Average rectifier effective value
- AC Voltage range: 4.200 to 600 V AC, 4 ranges (±2.3 % rdg. ±8 dgt. at 50 or 60Hz) - Average rectifier effective value
- DC Voltage range: 420.0 mV to 600 V DC, 5 ranges (±1.3 % rdg. ±4 dgt.)
- Resistance: 420.0 to 42.00 M-ohm, 6 ranges
- Accuracy: ±2.0 % rdg. ±4 dgt. (at 420 to 420 k-ohm range)
- Continuity: 420.0 ohm (Buzzer sounds at approx. 50 ohm or less)
- Frequency characteristics (at AC current/voltage): AC current: 50/60 Hz, AC voltage: 50 to 500 Hz
- Display section Digital/LCD (Maximum 4199 dgt.)
- Sampling rate: 2.5 times/sec or 1 times/3 sec
- Max. circuit voltage: 600 V AC rms (insulated wire)
- Power supply: CR2032 (3 VDC) × 1 (Continuous use 150 hours)
- Core jaw diameter: Ø 33 mm(1.30 in)
- Dimensions: 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D
The Bosch BLAZE GLM 42 135 ft. Laser Measure is a fully featured, easy-to-use tool, with a display guide that uses words, letters and icons to walk the user through each measurement process. The easy-to-read backlit colour display improves the visibility and usability of the laser measure. It provides real-time length, length, area, volume and indirect measuring functions, and it has a 20-measurement storage capability and addition/subtraction functionality. This tool includes default real-time measurement mode, adjusting the measurement the closer to or further from the target the laser measure is. The digital bubble vial provides a visual reference when measuring horizontal distances. Thanks to its laser precision technology and real-time measurement mode, it takes instant and reliable measurements up to 135 ft., to size up the job in seconds. It is accurate up to 11/16inch. And it fits in any pocket for easy access.
- Easy-to-read backlit colour display illuminates numbers in dark areas with distinct resolution, allowing work in low-light or no-light conditions
- Default real-time measurement mode immediately provides accurate measurement that automatically adjusts closer to or farther from the target
- Easy-to-use display guide - walks the user through each measurement process
- Multiple measuring features includes real-time length, length, area, volume and indirect functions, and addition/subtraction capability
- Memory storage provides storage for up to 20 measurements
- Accuracy and long-range measuring provides accuracy up to ±1/16inch. and measures up to a 135 ft. range
- Black Face, 1.5" Dial Diameter
- 0.0005" Dial Division
- 0.030" Range
- 0-15-0 Marking
- Shockproof dial indicator
- Made of stainless steel
Outside micrometer, 0-1", graduation 0001". Supplied with easy to open case, one handed operation. Includes Manufacturer Inspection Certificate traceable to NIST.
Features
- As compact as standard Series 2 dial indicators
- After the initial zero-setting with the ORIGIN button, the repeated absolute positioning is no longer necessary over the entire battery life
- Employing the ABSOLUTE linear encoder, the ID-S always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors
- SPC data output
- IP42 Dust Water Protection
- Alarm: Low Voltage, Counting value composition error, Over-flow error
- Absolute electrostatic capacitance type liner encoder
Applications
Ideal for the following applications: Digital Gauging, Fabricating, Manufacturing, Machining
FEATURES
- Mastercraft Digital Caliper,with an LCD display
- Inch to mm conversion button
- Stainless steel depth rod
- Thumb wheel adjustment
- Inside/outside measuring capability
- Size: 6" (15 cm)
Tool is used but in good overall condition. Tested and working. Missing 3 rubber feet on bottom. Includes power cable.
This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition.
Both are used but in very good overall condition. Shows some minor scuffs and wear. Tips are in great shape.
These items are used. They show signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. Set includes SIMFM14, SIMFM13, SIMFM11, SIMFM10A, SIMFM9
Tool is very used and shows lots of wear and use. Especially on the tips. This item is used. The item shows average signs of wear and tear including scuff marks, scratches, nicks, and worn finishes. Please refer to the pictures to get a better idea of the physical condition. The item has not been tested for full functionality.
Tool is in good overall used condition. Shows some signs of wear and use. No major damage. Tested and working.
Tool is used but in good overall condition. Shows some signs of wear and use. No major damage. Tested and working.
The Dremel 300 Series rotary tool offers the precision and control required to complete a wide range of projects--from fine art to home repair. Its variable speed control allows you to set the speed of the tool to match a particular accessory or the task at hand.
- EZ TWIST nose cap for fast accessory changes
- Variable speed
- Cutting guide
The item in this listing is in excellent pre-owned condition and in good working order.
MAYHEW PRO 5-PC SCREW EXTRACTOR KIT IN POUCH
KIT INCH 37332 - KIT METRIC 37334
S&G TOOL AID 18900 PROFESSIONAL RATCHETING TERMINAL CRIMPER
CRIMPS 10-22 GAUGE WIRE AND ELIMINATES DAMAGED OR DISTORTED TERMINALS. THE RATCHETING ACTION ENSURES A PERFECT CRIMP EVERY TIME
THEY ARE USED, BUT IN GOOD WORKING ORDER
MAC Tools EM111 20-1500 Amp AC/DC Current Probe
Able to measure currents from 5mA to 30A. No need to open the circuit, no need for electrical contact. Can be used on both AC and DC current. It can be used with all DMM who including AC/DC mV function. Able to measure the current leak on any vehicle and used for all diagnostic specialists.
Does not come with the box or manual
Complete kit includes 6 size bladed inserts. Very good overall condition. There is a name that is scribed into the base. Shows some marks and wear. No major damage.
he Milwaukee ¼-Sheet Palm Sander produces a fine, swirl-free finish. The 3.0 amp permanent magnet motor with 14,000 OPM produces constant speed and power. Button style paper clamp system allows for effortless paper changes.
The sander in this listing is in nice pre-owned condition and in good working order. This sander does NOT come with a dust bag.
https://www.avenueshopswapandsell.com/product/milwaukee-603321-14-in-sheet-palm-sander/212140
Made from aluminum construction and designed for household use this extension ladder is CSA approved Grade 3, ANSI type 3. Ideal for chores around the house, it features strong extruded "C" channel construction; slip-resistant serrated "D" rungs for safe climbing and comfort; high impact, non-marring end caps; and swivel feet. This ladder weighs 26 lbs and has a weight rating of 200lbs. It has a total length of 20', each section is 10' and it has a max. ext. length of 17'.
MOORE & WRIGHT No.965M 0-25MM / 0.01MM OUTSIDE METRIC MICROMETER IN BLACK FOLD CASE
Dewalt DG6000 Generator for sale. Starts on one pull. Used but in good working order.
FEATURES
- Precision Point™ Technology: Easy nail placement as a result of a smaller nose compared to current DEWALT nailers and no need to compress the contact trip to actuate the tool
- Drives straight 16Ga finish nails from 1-1/4" to 2-1/2" length
- Long life maintenance-free motor to keep from staining the work surface
- Tool-free jam release mechanism for easy nail removal
- Tool-free depth-of-drive adjustment for proper setting of nail heads
- Selectable trigger: sequential or contact actuation
- Rear exhaust to keep contaminates away from work
- Adjustable belt hook allows the tool to be kept near the user
- Kit Includes: Nailer, Fitting, Carrying Case and Extra No-Mar Tips
Tool is used and in good overall condition. Shows some very light signs of wear and use. No major damage. Tested and working. Includes hard case.
Tools Wrench Williams 1248TOB SN: n/a 1 1/2 inch
-
Extra Heavy Duty G-Clamps — Forged Features:
- Strongest G-Clamp available
- Dropped forged steel for strength and durability
- Adjustable steel swivel shoe to help clamp uneven surfaces
- Fast and smooth action twin start acme cold rolled thread
- Fused handle designed to bend if overloaded
- Recommended for metalworking and fabrication
- 12 inch
Bluepoint UE6 1/4 in. x 6 in. Friction Ball Extension -Made in U.S.A.-
This listing is for a preowned Blue Point UE6 1/4 in. drive X 6 in. long extension. The extension is in exceptionally clean condition with no notable sign of use.
Specifications:
Country Of Origin: USA
Length - inches: 6
Master Lock 2847DAT Stainless Steel Adjustable Coupler Latch Lock
This listing is for a Master Lock 2847DAT stainless steel adjustable trailer coupler latch lock. It is in new, unused condition, sealed in original packaging.
The Master Lock no. 2847DAT features a stainless steel trailer coupler latch lock, adjustable 5/8 in. (16 mm) to 2 in. 51 mm) long for maximum application flexibility.
Lock secures most latch-style trailer couplers
4-Pin tumbler lock resists picking
This item is being sold untested and as is. It comes with the charger but no battery.
Leave the cords behind! From the inventors of cordless and pneumatic nailing, now leading the cordless nailing market for over 25 years, Paslode is making the best even better with the introduction of the ground-breaking IMLi325 IMPULSE(TM) Lithium-Ion Cordless Framing Nailer. Powerful enough to drive 3 1/4" nails in the toughest lumber. Heavy-duty rafter/belt hook for taking jobsite abuse. Non-slip grip provides comfort and reduces hand fatigue. NEW tool-less depth of drive nail adjustment changes nail depth in an instant - even while wearing gloves! Nail lockout feature prevents blank driving. Compact size fits between 16" o.c. studs, joists and roof trusses
STANLEY 3/8" DRIVE PNEUMATIC NUTRUNNER AIR RATCHET
TESTED AND DOES WORK AS IT SHOULD
Kit is in excellent condition.
- Mastercraft Air Tool Kit offers 420 ft/lbs torque
- 4 assortment SCFMas: Air-powered 13/32” hammer/chisel SCFM - 2.7@90PSI, air-powered 1/4" full-size die grinder SCFM - 3.0@90PSI, air-powered 1/2" impact wrench SCFM - 3.7@90PSI, air-powered 3/8" ratchet SCFM - 3.1@90PSI
- 71 piece kit includes a 1/2" impact wrench, 3/8" ratchet, chisel, full die grinder and accessories
- Also includes a carrying case
Milwaukee Band Saw, comes in case. Visable wear to the tool. Please view photos.
** OPEN BOX **
The Greenworks 60V Brushless Chainsaw features a DigiPro™ brushless motor to provide more power, torque, quiet operation and longer motor life. It also features a variable speed trigger that allows for precise control during cuts. You will be capable of tackling up to 90 cuts on a fully charged 2.5Ah battery.
FEATURES
- Greenworks 60V Brushless Chainsaw features a DigiPro™ brushless motor to provide more power, torque, quiet operation and longer motor life
- Capable of up to 90 cuts on a fully charged 2.5Ah battery
- Battery completely charges in 75 minutes
- Lithium-ion battery has no memory and can be charged repeatedly with no effect on battery life
- 16" (45.7 cm) Oregon Bar and chain capable of up to 28” (71.1 cm) cuts
- Variable speed trigger for precise control when cutting
- Auto oiler with viewing window keeps your tool at peak performance
- Zero emissions and without the maintenance of gas tools
- Includes (1) 60V 2.5Ah Lithium-Ion Battery and (1) 75-minute Battery Charger
Power Bank is in good working condition. Comes with all attachments, instructions and carrying bag.
This item has been previously owned.
It has some minor cosmetic wear that can be seen in the photos.
Please see the photos for further details.
Mr Heater mh75ktr SN: ln270227317001208
These Guards have been previously owned but not used.
They come with the fittings and instruction sheet in their original packaging.
Please see the photos for further details.
The Dremel Ultra-Saw is designed for users wanting a multi-saw that can do everything the Dremel Saw-Max can do, and more. With a 7.5 amp motor and a durable drive train, the Ultra-Saw has more power for making long cuts. A metal foot and guard resists the heat generated by heavy-duty jobs like grinding and cutting metal. Large, 3.5- and 4-inch cutting wheels provide fast cutting speeds and improved performance in a wide variety of materials. Plus, with our exclusive accessories, the Dremel Ultra-Saw offers the added ability to perform surface preparation tasks like removing paint, rust and thin-set mortar.
- 7.5 Amps - for faster cutting and tougher applications
- Faster speed of cut - rip through plywood and cut more metal
- 3-in-1 tool - go beyond cutting and flush cutting with surface preparation applications including rust, paint, and thin set removal
- Added durability - improved drive train lasts 3x longer than the Saw-Max and its metal foot and guard handle tough applications
- Excellent line of sight for precise, confident cuts
In excellent near mint condition!
The RIDGID Trim Router is a must-have for any woodworking projects. With 5.5 amp, permanent magnet motor that gives you extra power in a compact size, this trim router also feature a gradual Soft-Start technology that allows a gradual start-up and therefore extended motor life. Along with the LED light that can improve visibility on working area, this trim router is also loaded with a variable speed for easy speed adjustment depending on the material application, clear round and square bases for added versatility and convenience, and a quick release lever that allows for easy removal of motor housing from base. Backed by Lifetime Service Agreement (with registration): 3-years limited warranty.
- Soft Start  For gradual start-up and extended life of the motor
- Micro Adjust Dial  For precise depth control
- Variable Speed  Easily adjust speed to material type and application
- "LED Light  Illuminates work area for improved visibility Lampe DÉL éclaire la surface de travail pour une"
- Clear Round and Square Bases  For added versatility and convenience
- Lifetime Service Agreement: Free parts and service for life with registration
- Includes: R2401 Trim router with ¼ -Inch collet and round basesquare basecollet wrenchedge guideguide bars¼ -Inch bitheavy duty contractor bagand Operators Manual
âââââââItem is used and shows signs of wear and use. Some light scuffs and marks. No major damage.
- Oversized depth adjustment wheel - for easily countersinking screws at desired setting
- Powerful 6.5 Amp motor - provides 3,700 RPMs to drive up 1 in. to 3 in. screws
- Hex grip micro texture enhanced
- Single finger trigger with lock-on button - allows for single or rapid driving applications
- Lightweight design offers greater ergonomics for extended use
- Tool-free nose piece - easily and quickly change between 1 in. - 3 in. fastener sizes
Tested and in working condition. Shows signs of wear and use. No major damage other than scuffs and some dirt.
Tested and in working condition. Shows heavy signs of wear and usage. Scuffs, dirty and marks. 18V 1.6aH Li-ion Battery is charged and tested. Does not include a charger.
MITUTOYO 982-522 digital tachometer. Fully functional. In excellent condition. Includes original case and manual.
All tools are used but in excellent condition. Includes screwdrivers; 601-4, 601-6, 602-4, 603-3, 666. D248-8 side cutter, D203-7 needle nose pliers, 12098 combination pliers. In Klein carry case.
M300P Professional VDV Cable Mapper
- Easy-to-read LCD display with backlight
- Port covers protect RJ45 and RJ11 ports from dust and debris
- Built in tone generator for cable tracing (separate amplifier probe required)
- Maps multiple cable runs with included RJ45 and coax F ID remotes (5 of each are included)
- Test patch cables or installed cables
- Remote ID kits available separately
Federal C21 .0001" Dial Indicator Gauge Machinist Tool Jeweled Miracle Movement. Smooth movement. Easily returns to start position. Includes back plate and original box. Crack on front glass.
IdeIdeal Ironworker Rodbuster Concrete Tie Wire Reel model 80 Rebar Tying Tool. Includes wire 0.063" thick. Used and shows some marks and wear.
RotoZip DD1-10 Direct Drive Attachment by RotoZip DD1-10. Item is used but in excellent condition.
FEATURES & SPECS
FEATURES
- Metal gear housing for jobsite durability and increased reliability
- Depth-sensitive, "set and forget" nosepiece for consistent fastener depth
- Two-finger trigger for increased comfort and ease of use
- Helical-cut steel and heat-treated gears for long life and durability
- Lightweight with excellent ergonomics
SPECIFICATIONS
- AMPS 6.3 AMPS
- CLUTCH TYPE STANDARD
- DEPTH SENSITIVE NOSE CONE TRUE
- MAX FASTENER SIZE #8
- NO LOAD SPEED 0-4,000 RPM
- POWER TOOL TYPE CORDED
- SYSTEM 120V
- TOOL WEIGHT 3.1 LBS
- TORQUE 81 IN-LBS
FEATURES & SPECS
FEATURES
Helical-cut steel and heat-treated gears for long life and durabilityHigh torque for deck building, drywall and heavy gauge steel stud framingMetal gear housing for jobsite durability and increased reliabilityDepth-sensitive, "set and forget" nosepiece for consistent fastener depthTwo-finger trigger for increased comfort and ease of useExcellent ergonomics offers less user fatigue
SPECIFICATIONS
AMPS 6.5 AMPS
CLUTCH TYPE STANDARD
DEPTH SENSITIVE NOSE CONE TRUE
MAX FASTENER SIZE #14
NO LOAD SPEED 0-2,500 RPM
POWER TOOL TYPE CORDED
SYSTEM 120V
TOOL WEIGHT 3.6 LBS
TORQUE 132 IN-LBS
Features for Dewalt DW274 Drywall Screwdriver
Ideal for fastening drywall and panels to wooden or metal studs.
Removeable depth sensitive “set and forget” nosepiece for consistent fastener depth.
Lightweight and compact design to reduce user fatigue and increase productivity.
Soft grip surface on handle and switch to reduce vibration and enhance user comfort.
Specifications for Dewalt DW274 Drywall Screwdriver
- Max Torque: 10 Nm
- Power Input: 540 Watts
- Power Output: 295 Watts
- No Load Speed: 0-4000 rpm
- Max Screw Diameter: 4.8 mm
- Tool Holder (Hex): 6.35 mm
The DW255 5,300 rpm High Speed VSR Drywall Screwgun is ideal for depth sensitivity for consistent fastener depth. Constructed with helical-cut steel and heat-treated steel gears for long life and durability. Rubber grip and two-finger trigger provides comfort and control.
SPECIFICATIONS:
AMPS 6.0 AMPS
CLUTCH TYPE STANDARD
MAX FASTENER SIZE #8
NO LOAD SPEED 0-5,300 RPM
POWER TOOL TYPE CORDED
SYSTEM 120V
TOOL WEIGHT 2.9 LBS
TORQUE 60 IN-LBS
FEATURES
Bosch Laser Distance Measure is pocket-sized at only 4" (10 cm) tall, the smallest laser range finder Unit comes with an ergonomic soft-grip area for sure grip and comfort. Features 4 measurement modes: Length, area, volume, and continuous for maximum versatility. 2 Measuring reference points: Front and back. Offers 4 measurement systems: Inches, feet and inches, decimal feet and metric. Range: Up to 130' (40 m). Accuracy: ± 1/16" (0.15 cm). Includes: Laser measure, and belt pouch
This item has been previously owned and is good condition.
Helps Prevent Damage To Appliances and Plumbing Fixtures From High Water Pressure, Great for RVs and Boats.
Please see the photos.
This tool has been previously owned and is in good working order. The Mathey Dearman Quik-Fit Clamp offers the most advanced method of achieving quick, easy and precise fit-ups. The Quik-Fit is a tack-type clamp that requires no special training to use. Quik-Fit can be used on both carbon and stainless steel without adding special shoes or screws. The clamp will not only align pipe to pipe, pipe to fitting, pipe to tee, or pipe to flange, but can also be used to adjust for pipe "Hi-Lo". The light weight and simple design makes the Quik-Fit Clamp ideal for applications where "out-of-round" conditions do not exist. FEATURES: Rugged construction. Smooth-acting tension mechanism. Stainless steel contact points and alignment screws. Sliding tensioning "T" handle. Fine adjustment screws. Light and compact. Two-handed handle. All parts cadmium plated or powder coated. BENEFITS: Holds up to job site conditions. Accurate and firm gripping of pipe or fitting. Prevents contamination in pipe or fitting. Can be re-positioned for working in confined spaces. Accurate "Hi-Lo" adjustment allows working in restricted spaces. Positive, secure locking. Resists spatter and corrosion QFC-12 For 1 - 2 1/2 " (25 - 64 mm) pipe 8" x 7" x 4 1/2" _ 203 x 178 x 115 4 / 1.8. Please see the photos. Â
This item has been previously used. Please see the photos for details about the condition.
This item has been previously used. Please see the photos for details about condition.
This item has been previously used. Please see the photos.
This item has been previously used. Please see the photos for details.
This item has been previously used. Please see the photos for further details about the condition.
This item has been previously used. It is in very good condition. Please see the photos.
This item has been previously used. Please see the photos.
This item has been previously used. Please see the photos.
These sockets have been previously used and are in good working order. They come with a red metal case. It includes numbers 19 - 8.
This item has been previously used. It does have some letters on the handle. Please see the photos for details.